Kirchner Bandsaw *MIT BILD*

Das ganze Thema rund um die Holzbearbeitung wird hier diskutiert. Die Grenzen sind hier deutlich weiter gezogen als im Handwerkzeugforum. Wenn Du nicht sicher bist, wo Dein Beitrag hingehört, ist er wahrscheinlich hier am besten aufgehoben.
Antworten
Giuliano
Beiträge: 4
Registriert: Fr 29. Apr 2016, 10:23
Kontaktdaten:

Kirchner Bandsaw *MIT BILD*

Beitrag von Giuliano »


Hi all,
my name is Giuliano and I am Italian. Sorry if I am writing in English but, unfortunately, my German is really below zero.
As in the object, I recently acquired an old Kirchner bandsaw. It is in good conditions but needs of a good restoring job.





This bandsaw has 350 mm wheels, lacks of a motor and has been covered by an odd color paint.
Before I start my restoring job, I would like to acquire info about this model. May be someone could have the same bandsaw or images or an instruction booklet.
Any advice will be appreciated.
Many Regards
Giuliano

Rolf Richard
Beiträge: 3390
Registriert: Do 16. Mär 2017, 07:44
Kontaktdaten:

Re: Kirchner Bandsaw

Beitrag von Rolf Richard »


Hi Giuliano!

Nice bandsaw! Seems to be quite old but in a relatively good condition even with a lacking motor. Getting a replacement motor should not be a big problem, ask a company selling electric motors. Consider a 3 phase motor if you have 3 phase electrical installation available. Think about 1 kW or a bit more. Consider a blade speed of about 30 m/min. Higher speed needs better blades.

By the way my Italian is worse too!

Regards
Rolf

Giuliano
Beiträge: 4
Registriert: Fr 29. Apr 2016, 10:23
Kontaktdaten:

Re: Kirchner Bandsaw

Beitrag von Giuliano »


Thank you Rolf.
A blade speed of 20-25 m/s was just that I had in mind for this saw. It needs a pedestal for reaching the right table height and for holding the motor.
Unfortunately I have not a three-phase current, so I have to buy a mono-phase type motor.
Regards
Giuliano

Rolf Richard
Beiträge: 3390
Registriert: Do 16. Mär 2017, 07:44
Kontaktdaten:

Re: Kirchner Bandsaw

Beitrag von Rolf Richard »


Hello Guiliano,

for a single phase motor it might be a good idea to have a little bit more power due to the fact that single phases motors produce less torque than a 3 phase motor of similar wattage.

As a hint only: My Kity 613 has a table height of 97 cm. About right for my body height of 183 cm.

Regards
Rolf



Giuliano
Beiträge: 4
Registriert: Fr 29. Apr 2016, 10:23
Kontaktdaten:

Re: Kirchner Bandsaw

Beitrag von Giuliano »


Well Rolf,
Your advice for the table height is a good point....I'll do a pedistal so the table height can be about 100 cm, since I am 187 cm tall.
Surfing the net and searching for Kirchner & Co. Leipzig, I discovered they closed after the WWII, so I assume the bandsaw be pre-1945.
Ciao
Giuliano

Michl
Beiträge: 482
Registriert: Di 4. Sep 2012, 18:20

Re: Kirchner Bandsaw

Beitrag von Michl »

[In Antwort auf #83685]
Hello Giuliano!

Here´s a complete Kirchner catalogue online - with a lot of Bandsaws and other fantastic Machines:
http://digital.slub-dresden.de/werkansicht/dlf/94269/98/0/
It´s also possible to download it.

Greetings from Franconia!

Michl

Giuliano
Beiträge: 4
Registriert: Fr 29. Apr 2016, 10:23
Kontaktdaten:

Re: Kirchner Bandsaw

Beitrag von Giuliano »


Thank you very much! Although my bandsaw is a later model (1930 ca.) the catalog of which you have provided the link contains many other useful info.
Grazie
Giuliano

Michl
Beiträge: 482
Registriert: Di 4. Sep 2012, 18:20

Re: Kirchner Bandsaw

Beitrag von Michl »


You're welcome!
I am glad you are interested in the catalog.

yours,

Michl

Michl
Beiträge: 482
Registriert: Di 4. Sep 2012, 18:20

Re: Kirchner Bandsaw

Beitrag von Michl »

Antworten